Cable lacing method column in the same cable, pay attention to the correct set of two or more than two piles methods simultaneously on the same cable ship or shore bollards bollards's.
Layout requirements
With an auxiliary cable for cable tow rope bollards used in both the bow and stern of the configuration, the direction of bollards and cable traction direction should be consistent. Required to maintain a certain distance between the bollards and side fairlead or fairlead in the big boat bollards should be not less than 6 times the diameter of no less than 10 times the boat should normally be in the 1.5 ~ 2.5m the range in order to provide sufficient deck with a cable using an auxiliary cable. Bollards around without any obstacle within 1m from the outer edge of the gunwale bollards shall be not less than 1.5 times the diameter of the bollards. If bollards and fairleads middle bulwark brackets, the bollards should take into account the position of the cable is not touching the toggle plate.
The company is a development and production of all kinds of marine outfitting equipment, mooring equipment, fairlead, roller fairlead, fairlead rollers, bollards, abandoned anchor, a boat cap, ladders and so on. The production of product variety, quality and reliable. |
